Bob Green Bob Green's صفحة الملف الشخصي

Bob Green Bob Green

0 دورة ملتحَق بها • 0 اكتملت الدورة

سيرة شخصية

Comprehensive Cisco 100-150 Exam Questions in PDF Format

DOWNLOAD the newest Itcerttest 100-150 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1-Ts0CKl4zUnuDgKOymce8-waWT1QkeWj

Are you an exam jittering? Are you like a cat on hot bricks before your driving test? Do you have put a test anxiety disorder? If your answer is yes, we think that it is high time for you to use our 100-150 exam question. Our 100-150 study materials have confidence to help you Pass 100-150 Exam successfully and get related certification that you long for. The 100-150 guide torrent from our company must be a good choice for you, and then we will help you understand our 100-150 test questions in detail.

Our 100-150 exam questions are perfect, unique and the simplest for all exam candidates for varying academic backgrounds. This is the reason that our 100-150 study guide assures you of a guaranteed success in the exam. The second you download our 100-150 learning braindumps, then you will find that they are easy to be understood and enjoyable to practice with them. And there are three versions of the 100-150 praparation engine for you to choose: the PDF, Software and APP online.

>> 100-150 Exams Dumps <<

Cisco 100-150 Latest Examprep, Positive 100-150 Feedback

Our Cisco 100-150 practice test software is the most distinguished source for the Cisco 100-150 exam all over the world because it facilitates your practice in the practical form of the Cisco Certified Support Technician (CCST) Networking certification exam. Moreover, you do not need an active internet connection to utilize Cisco 100-150 Practice Exam software. It works without the internet after software installation on Windows computers.

Cisco Certified Support Technician (CCST) Networking Sample Questions (Q31-Q36):

NEW QUESTION # 31
A local company requires two networks in two new buildings. The addresses used in these networks must be in the private network range.
Which two address ranges should the company use? (Choose 2.)
Note: You will receive partial credit for each correct selection.

A. 192.168.0.0 to 192.168.255.255
B. 192.16.0.0 to 192.16.255.255
C. 172.16.0.0 to 172.31.255.255
D. 11.0.0.0 to 11.255.255.255

Answer: A,C

Explanation:
The private IP address ranges that are set aside specifically for use within private networks and not routable on the internet are as follows:
* Class A: 10.0.0.0 to 10.255.255.255
* Class B: 172.16.0.0 to 172.31.255.255
* Class C: 192.168.0.0 to 192.168.255.255
These ranges are defined by the Internet Assigned Numbers Authority (IANA) and are used for local communications within a private network123.
Given the options: A. 172.16.0.0 to 172.31.255.255 falls within the Class B private range. B. 192.16.0.0 to
192.16.255.255 is not a recognized private IP range. C. 11.0.0.0 to 11.255.255.255 is not a recognized private IP range. D. 192.168.0.0 to 192.168.255.255 falls within the Class C private range.
Therefore, the correct selections that the company should use for their private networks are A and D.
References :=
* Reserved IP addresses on Wikipedia
* Private IP Addresses in Networking - GeeksforGeeks
* Understanding Private IP Ranges, Uses, Benefits, and Warnings

NEW QUESTION # 32
HOTSPOT
Computers in a small office are unable to access companypro.net. You run the ipconfig command on one of the computers.
The results are shown in the exhibit.

You need to determine if you can reach the router.
Which command should you use? Complete the command by selecting the correct options from each drop-down lists.

Answer:

Explanation:

Explanation:
To determine if you can reach the router, you should use the ping command followed by the IP address of the router. The ping command is a network utility used to test the reachability of a host on an Internet Protocol (IP) network and to measure the round-trip time for messages sent from the originating host to a destination computer.
The Default Gateway in the ipconfig results is typically the router's IP address in a home or small office network. In this case, the Default Gateway is 192.168.0.1, which is the address you would ping to check connectivity to the router.
Reference: =
How to Use the Ping Command
Testing Network Connectivity with the Ping Command
To determine if you can reach the router, you should use the ping command with the IP address of the router.
Command: ping
Target: 192.168.0.1
So, the completed command is:
ping 192.168.0.1
Step by Step Comprehensive and Detailed Explanation.
ping: The ping command sends ICMP Echo Request messages to the target IP address and waits for an Echo Reply. It is commonly used to test the reachability of a network device.
192.168.0.1: This is the IP address of the default gateway (the router) as shown in the ipconfig output. Pinging this address will help determine if the computer can communicate with the router.
Reference: Using the ping Command: ping Command Guide

NEW QUESTION # 33
An engineer configured a new VLAN named VLAN2 for the Data Center team. When the team tries to ping addresses outside VLAN2 from a computer in VLAN2, they are unable to reach them.
What should the engineer configure?

A. Default gateway
B. Additional VLAN
C. Static route
D. Default route

Answer: A

Explanation:
When devices within a VLAN are unable to reach addresses outside their VLAN, it typically indicates that they do not have a configured path to external networks. The engineer should configure a default gateway for VLAN2. The default gateway is the IP address of the router's interface that is connected to the VLAN, which will route traffic from the VLAN to other networks12.
Reference: =
* Understanding and Configuring VLAN Routing and Bridging on a Router Using the IRB Feature
* VLAN 2 not able to ping gateway - Cisco Community
* VLANs: Virtual Local Area Networks (VLANs) logically segment network traffic to improve security and performance. Devices within the same VLAN can communicate directly.
* Default Gateway: For devices in VLAN2 to communicate with devices outside their VLAN, they need a default gateway configured. The default gateway is typically a router or Layer 3 switch that routes traffic between different VLANs and subnets.
* Additional VLAN: Not needed in this scenario as the issue is related to routing traffic outside VLAN2, not creating another VLAN.
* Default Route: While a default route on the router may be necessary, the primary issue for devices within VLAN2 is to have a configured default gateway.
* Static Route: This is used on routers to manually specify routes to specific networks but does not address the need for a default gateway on the client devices.
Reference:
* Cisco VLAN Configuration Guide: Cisco VLAN Configuration
* Understanding and Configuring VLANs: VLANs Guide

NEW QUESTION # 34
A user reports that a company website is not available. The help desk technician issues a tracert command to determine if the server hosting the website is reachable over the network.
The output of the command is shown as follows:

What can you tell from the command output?

A. The server with the address 192.168.1.10 is reachable over the network.
B. The server address 192.168.1.10 is being blocked by a firewall on the router at hop 3.
C. Requests to the web server at 192.168.1.10 are being delayed and time out.
D. The router at hop 3 is not forwarding packets to the IP address 192.168.1.10.

Answer: A

Explanation:
The tracert command output shows the path taken to reach the destination IP address, 192.168.1.10.
The command output indicates:
* Hops 1 and 2 are successfully reached.
* Hop 3 times out, meaning the router at hop 3 did not respond to the tracert request.
However, this does not necessarily indicate a problem with forwarding packets, as some routers may be configured to block or not respond to ICMP requests.
* Hops 4 and 5 are successfully reached, with hop 5 being the destination IP 192.168.1.10, indicating that the server is reachable.
Thus, the correct answer is C. The server with the address 192.168.1.10 is reachable over the network.
Reference: =
* Cisco Traceroute Command
* Understanding Traceroute
The tracert command output indicates that the server with the address 192.168.1.10 is reachable over the network. The asterisk (*) at hop 3 suggests that the probe sent to that hop did not return a response, which could be due to a variety of reasons such as a firewall blocking ICMP packets or the router at that hop being configured not to respond to ICMP requests. However, since the subsequent hops (4 and 5) are showing response times, it means that the packets are indeed getting through and the server is reachable12.
Reference: =
* How to Use Traceroute Command to Read Its Results
* How to Use the Tracert Command in Windows

NEW QUESTION # 35
Examine the following output:

Which two conclusions can you make from the output of the tracert command? (Choose 2.) Note: You will receive partial credit for each correct answer.

A. The routers at hops 5 and 6 are offline.
B. The trace successfully reached the www.cisco.com server.
C. The IPv6 address associated with the www.cisco.com server is 2600:1408: c400: 38d: : b33.
D. The device sending the trace has IPv6 address 2600:1408:c400:38d :: b33.
E. The trace failed after the fourth hop.

Answer: B,C

Explanation:
*Statement A: "The trace successfully reached the www.cisco.com server." This is true as indicated by the
"Trace complete" message at the end, showing that the trace has reached its destination.
*Statement C: "The IPv6 address associated with the www.cisco.com server is 2600:1408:c400:38d::b33." This is true because the final hop in the trace, which is the destination, has this IPv6 address.
*Statement B: "The trace failed after the fourth hop." This is incorrect as the trace continues beyond the fourth hop, despite some intermediate timeouts.
*Statement D: "The routers at hops 5 and 6 are offline." This is not necessarily true. The routers might be configured to not respond to traceroute requests.
*Statement E: "The device sending the trace has IPv6 address 2600:1408:c400:38d::b33." This is incorrect; this address belongs to the destination server, not the sender.
References:
*Understanding Traceroute: Traceroute Guide

NEW QUESTION # 36
......

Knowledge is defined as intangible asset that can offer valuable reward in future, so never give up on it and our 100-150 exam preparation can offer enough knowledge to cope with the exam effectively. To satisfy the needs of exam candidates, our experts wrote our 100-150 practice materials with perfect arrangement and scientific compilation of messages, so you do not need to study other numerous 100-150 study guide to find the perfect one anymore.

100-150 Latest Examprep: https://www.itcerttest.com/100-150_braindumps.html

It has been accepted by thousands of candidates who practice our 100-150 study materials for their exam, Our 100-150 study material is the most popular examination question bank for candidates, And do you want to be such a fish to pass the competitive examination in the Cisco 100-150 Latest Examprep field, If you are really not sure which version you like best, you can also apply for multiple trial versions of our 100-150 exam questions.

Bridges control the collision domains on the network, Preparing Audience Handouts, It has been accepted by thousands of candidates who practice our 100-150 Study Materials for their exam.

Our 100-150 study material is the most popular examination question bank for candidates, And do you want to be such a fish to pass the competitive examination in the Cisco field?

Latest Released Cisco 100-150 Exams Dumps: Cisco Certified Support Technician (CCST) Networking

If you are really not sure which version you like best, you can also apply for multiple trial versions of our 100-150 exam questions, We are sure that we offer the best excellent exam certification 100-150 VCE dumps.

2025 Latest Itcerttest 100-150 PDF Dumps and 100-150 Exam Engine Free Share: https://drive.google.com/open?id=1-Ts0CKl4zUnuDgKOymce8-waWT1QkeWj